How to Install and Configure ProFTPD Server on Ubuntu/Debian

For most setups, Standalone mode is recommended as it allows for better performance and easier management.

After the installation is complete, ProFTPD will automatically start and you can verify that the service is running by using:

sudo systemctl status proftpd

If ProFTPD is running correctly, you’ll see its status as “active (running)“.

Step 2: Configure ProFTPD Server in Ubuntu

Before start using it, we’ll need to edit some files, the /etc/proftpd/proftpd.conf is the default configuration file for Ubuntu/Debian servers, to start editing it using the nano editor as shown.

sudo nano /etc/proftpd/proftpd.conf

Here are a few basic configuration settings you might want to change to suit your needs:

1. The ServerName is the name of your FTP server, you can use your domain name or a custom name for easy identification.

ServerName "MyFTPServer"

2. The DefaultRoot to ensure FTP users are confined to their home directories and can’t navigate the entire filesystem, uncomment this line by removing the # in front:

DefaultRoot ~

3. By default, FTP operates on port 21. If you want to use a different port (for example, for security reasons), change the port number here:

Port 2121

4. The MaxInstances setting controls how many clients can be connected at the same time. You can adjust this according to your needs:

MaxInstances 30

5. If you want to disable anonymous access for security reasons, ensure the Anonymous section looks like this:

<Anonymous ~ftp>
  User ftp
  Group nogroup
  # We want clients to be able to login with "anonymous" as well as "ftp"
  UserAlias anonymous ftp
  # Limit the maximum number of anonymous logins
  MaxClients 10
  # Disallow login
  <Limit LOGIN>
    DenyAll
  </Limit>
</Anonymous>

After making these changes, save the file and restart the ProFTPD service to apply the changes:

sudo systemctl restart proftpd

During ProFTPD installation, a default “proftpd” user is created automatically, but we’ll need to create a password for it, to do so, run.

sudo passwd proftpd

Step 3: Creating ProFTPD Users

ProFTPD can use your system’s regular user accounts for FTP access, which means you don’t need to create separate FTP accounts if your users already have accounts on the server.

To create a new user for FTP access, use the following adduser command:

sudo adduser ftpuser

You’ll be prompted to enter a password and some optional information for the new user. This account will now be able to log into the FTP server using their username and password.

If you want this user to be restricted to their home directory, ensure the DefaultRoot ~ option is set in the proftpd.conf file, as mentioned earlier.

Step 4: Secure ProFTPD Server

FTP is inherently insecure because it transmits data, including usernames and passwords, in plain text. To enhance security, you should configure ProFTPD to use FTPS, which adds encryption using SSL/TLS.

If you don’t have SSL certificates, you can generate a self-signed certificate for testing purposes. For a production environment, it’s recommended to use a certificate from a trusted Certificate Authority (CA).

To generate a self-signed SSL certificate:

sudo openssl req -x509 -newkey rsa:2048 -keyout /etc/ssl/private/proftpd.key -out /etc/ssl/certs/proftpd.crt -days 365 -nodes

After generating the certificate, edit the proftpd.conf file again to enable FTPS.

sudo nano /etc/proftpd/proftpd.conf

Add or uncomment the following lines:

<IfModule mod_tls.c>
   TLSEngine on
   TLSLog /var/log/proftpd/tls.log
   TLSProtocol SSLv23
   TLSRSACertificateFile /etc/ssl/certs/proftpd.crt
   TLSRSACertificateKeyFile /etc/ssl/private/proftpd.key
   TLSVerifyClient off
   TLSRequired on
</IfModule>

After making these changes, restart ProFTPD:

sudo systemctl restart proftpd

Step 5: Test FTPS Connection

To test your FTPS setup, you can use an FTP client like FileZilla or any other client that supports FTPS.

• Open your FTP client and create a new site profile.
• Enter the FTP server’s IP address or domain name, username, and password.
• In the connection settings, choose FTPS or FTP over SSL/TLS.

If everything is set up correctly, you should be able to connect securely to your ProFTPD server.

Step 6: Manage Firewall Settings

If you are running a firewall (like UFW), you’ll need to allow FTP traffic through the firewall.

To allow standard FTP:

sudo ufw allow 21/tcp

For FTPS (if you’re using it on a different port), you’ll need to allow that port too. For example, if you changed the port to 2121:

sudo ufw allow 2121/tcp

After making these changes, restart the firewall:

sudo ufw reload

Step 7: Testing the FTP Server

To test if your ProFTPD server is working, use a browser or FTP client. You can connect to your FTP server with the following syntax:

ftp://<server-ip-or-domain>

Log in with the FTP user account you created earlier. You should be able to upload, download, and manage files on the server.

Step 8: Troubleshooting ProFTPD

Any available error messages will be stored in /var/log/proftpd/proftpd.log by default, you may check this file if your ProFTPD server installation isn’t working.

You must also note that sometimes it happens that the ProFTPD server lags and you can’t access the server due to the “Connection Refused” message, it is not a problem, all you have to do is to keep restart the ProFTPD server until it works (in case if there were no other errors).

Conclusion

You’ve successfully installed and configured ProFTPD on Ubuntu and Debian systems. This guide covered the basic installation, configuration, security setup with SSL/TLS, and firewall adjustments. You now have a flexible and secure FTP server for your file transfer needs.

For advanced configuration, such as limiting bandwidth, setting up virtual users, or enabling anonymous uploads, consult the ProFTPD documentation. Always make sure to secure your server and keep your software up to date for maximum security.