How to take good photos with a cheap phone

Even cheap phones nowadays offer a ton of camera settings and modes to play with. I was surprised to find manual camera controls on my Moto G14, and there are even goodies like Burst Mode for action photos and Night Vision for low-light situations. However, not every setting is working in your favor.

Resolution – My Moto G14 has a 50MP camera, but it takes 12.5MP photos by default. I assumed that switching to 50MP mode would give me higher-quality images with more detail, but instead, 50MP photos looked worse.

That’s because the Moto G14’s 50MP camera uses pixel binning – a now-common camera feature that groups neighboring pixels to use them as one larger and more sensitive pixel. This camera is optimized for taking 12.5MP shots, and switching to 50MP mode reduces its already weak light sensitivity.

Your experience may vary if you have a different phone, but if it uses a camera with 32MP or more, it is likely better to stick to the recommended (default) image resolution.

AI Optimizations – Some phones come with built-in software that recognizes what you’re taking a picture of and tries to optimize the camera settings for the situation. Every brand’s algorithms are different, so again, your experience may vary, but it’s not impossible to end up with a photo that’s objectively made worse by exaggerated colors and contrast – just look at those radioactive tomatoes in the picture below!

Whatever phone you have, try to disable any AI scene optimizers and see if you’ll like the clean photos better. As a bonus, turning these off might speed up your camera app. And if you prefer the “optimized” photos with extra color and contrast, that’s fine too. 

HDR – High Dynamics Range mode is a feature that improves detail in the brightest and darkest areas of the frame. It’s great having it on for improved image quality, and I’d recommend leaving it on at all times. It may noticeably slow down the camera app on cheaper phones, but I think the boost in quality is worth the lag. 

RAW – Nowadays, even some cheaper phones have a RAW format option in their camera apps. This is a setting that tells the camera to save an uncompressed version of the image alongside the compressed, JPG variant. 

Tip #4: Camera modes

Night Mode – Chances are you’ll find some kind of a night mode on most of today’s phones. Fortunately, this one tends to work even on cheaper hardware, but you may need to activate it manually when it’s needed. Use it whenever you can – even for moderately lit scenes indoors or outside at sunset. When can you use night mode? Well, it works by taking multiple exposures in sequence and then stacking them to produce a clearer, brighter image. Its drawback is that it requires you to keep the camera still for several seconds, and taking images of moving subjects is out of the question.

And again, it doesn’t have to be night for Night Mode to be useful. As long as you have a static scene and you don’t mind the wait, your phone’s Night Mode might perform even better than its HDR algorithms.

Manual/Pro mode – Sorry to say it, but manual camera settings can do very little to compensate for low-quality camera hardware. They might, however, make up for struggling camera software. Of course, it’s impractical to shoot in Pro mode only, but manual settings might help you get a better photo in challenging situations.

For example, here’s a shot I took on my Moto G14. Its camera couldn’t set the right colors as it got confused by the warm glow of the flame. At the same time, The autofocus got thrown off by a reflective puddle of candle wax. So I swiftly switched to Pro mode to set the focus and color temperature manually. The result was a sharper photo with proper colors.

Auto mode – inaccurate colors and focus. Manual mode – accurate colors and sharp focus.

In situations where using a tripod or some sort of support (like a table or a ledge) is an option, you may try combining the lowest ISO setting with a slower shutter speed for minimum noise. This would work only for static situations like landscapes and architecture.Burst Mode – this underrated and often forgotten feature shoots multiple images in rapid succession. Then you may pick the exact moment of action you want to preserve and discard the rest of the images. The downside is that your burst photos will have HDR turned off, so image quality will suffer. Burst mode is traditionally activated by holding down the capture button.

Zooming – If you have a cheap phone, the best type of zoom is with your legs. If possible, get closer to your subject instead of relying on digital zoom or on a cheap, basic telephoto camera (if your phone has one at all).

Bonus tips

Clean your lens – almost every time someone hands me their phone to take a picture, I look at their camera first. 9 out of 10 times it’s covered in finger grease, so I give it a gentle wipe with my sleeve. Smudges on the camera lens cause soft, hazy photos, especially on cheaper phones which may not have a special lens coating to prevent them.

Keep your horizon straight – following this basic composition tip will improve your photos in a subtle way. To help you keep your camera horizontal, enable the grid feature and use it as a guide when composing your shot. Photos can also be easily straightened in Google Photos after they’ve been captured.