The new Nvidia GeForce RTX 40 lineup includes some of the most power-hungry graphics cards on the market. Because of that, you may be wondering if you’ll need a new power supply (PSU) in order to support the borderline monstrous capabilities of the RTX 4090.
To answer some of these concerns, Nvidia released new information about the power consumption of its new GPUs. The conclusion? Well, it’s really not all that bad after all.
Prior to the official announcement of the RTX 40-series, the cards have been the subject of much power-related speculation. The flagship RTX 4090 received the most coverage of all, with many rumors pointing toward insane requirements along the lines of 800-900W. Fortunately, we now know that those rumors weren’t true.
The RTX 4090 has a TGP of 450W, the same as the RTX 3090 Ti, and calls for a minimum 850W PSU. The RTX 4080 16GB takes things down a few notches with a 320W TGP and a 750W power supply. Lastly, the RTX 4070 in disguise, also known as the RTX 4080 12GB, draws 285W and calls for a 700W PSU.
Nvidia claims that this is not an increase from the previous generation, but it kind of is — after all, the RTX 3090 had a TGP of 350W. With that said, it’s not as bad as we had thought, but many are still left to wonder if they need to upgrade their existing PSUs or not.
Nvidia has now assured its customers that they can stick to the PSU they currently own as long as it meets the wattage requirements for that given card.
Similarly, Nvidia doesn’t expect there to be any problems when it comes to 8-pin to PCIe Gen 5 16-pin adapter compatibility. As said by Nvidia on its FAQ page: “The adapter has active circuits inside that translate the 8-pin plug status to the correct sideband signals according to the PCIe Gen 5 (ATX 3.0) spec.”
There’s also another fun little fact to be found in that FAQ: Nvidia confirms that the so-called smart power adapter will detect the number of 8-pin connectors that are plugged in. When four such connectors are used versus just three, it will enable the RTX 4090 to draw more power (up to 600 watts) for extra overclocking capabilities.
There have also been questions about the durability of the PCIe 5.0 connectors, which are rated at 30 cycles. Some might consider that to not be much, but Nvidia clears this up by saying that this has almost always been the case, or at least has been over the past twenty years.
Lastly, Nvidia clarified the matter of the possibility of an overcurrent or overpower risk when using the 16-pin power connector with non-ATX 3.0 power supply units. It had, indeed, spotted an issue during the early stages of development, but it has since been cleared up. Again, seemingly nothing to worry about there.
All in all, the power consumption fears have largely been squelched. Nvidia did ramp up the power requirements, but not as significantly as expected, so as long as your PSU matches what the card asks for, you should be fine. Let’s not breathe that sigh of relief yet, though — the RTX 4090 Ti might still happen, and that will likely be one power-hungry beast.
Editors’ Recommendations
